Justice

What if I were to get a USB to serrial cconverter do you think it would work ?.

Thanks you 2 that would explain things :o.

What a mupet it looks like it was owned by a tattoo artist, IMO it would sell much quicker if they had left the paintwork alone.

Mr T Is your Vag Com lead usb or serrial I D/L'd VDS Pro but the software will not see my VC USB lead. Cheers.

And

After doing a bit of checking different sites I think I am going to plump for the Memoscan U581

Stevoo the reader you have , can it only read and clear codes or can it do other functions as well. for

I had my light came on a few days ago and ran Vag Com I done some messing and cleared what I thought was the fault (dodgy fuse) and cleared the codes , I rescaned the car and it comes up with no faults found but the engine light is still on. Should it turn off automaticly or do I have to do it by another method. I point to make is address1 engine dose not scan it says can not find module on both registered 3.11 and shareware 409 Galaxy 2.3 auto X plate 2000 any help would be great, also is there a better software to use than Vag Com on the 2.3 ( i dont mind spending a few

CFirst poit of call is to check the wires on the door loom to make sure you don't have a break.

lol prob was robbed, it was a main dealer add on from VW hence the high price, but that was inc first class delivery :) Joking aside I'm sure I asked on here before I brought it and was pointed in VAG direction but it could have been the VR6 forum.

Thanks that's a great help, will set VC when I have a spare afternoon.

To fit the remote kit is a 5 min job and if you have electric windows it will close or open them depending on lock or unlocking, you just keep your finger on the button, I think I paid

Would anyone know if I can get a arm / disarm beeb indication rather or as well as just the direction lights flashing. thanks.

When I was looking for my Galaxy I came accross a MK1 on a Y plate :D

Almost a year since my last post been looking through the topics, nice to see most of the olduns still here and quite a few newer members.

After getting shot of my old Sharan VR6 and getting an 03 Mondeo a year later I found it was'nt big enough so brought myself a Gal on Tuesday so will be pestering peeps lol! :D.

I hate the way they put people through who are clearly only good enough to take the pi55 out of at a later stage , as Bleeno said of the Madonna monster, she obviously isn't a full shilling so for the judges to put her through and give her faulse hope that she is quite good then tonight totally shred her world by saying she's rubbish you could see the hurt on her face, I think it is damn right nasty. I run a Karaoke mid week and sing in clubs at the weekend and when doing Karaoke I get my fair share of awful singers and normally it is the ones who are a sandwich short of a picnic who think they are good having said that I would never tell them what I think because they believe in themselves and enjoy what they do. I think the result of tonight's show was about right in my opinion the opera guy Potts was first class even if the sound man didn't get they balance right.

You can get the key pads very cheap on flee bay.

The one from alpha should work fine as thats who I got mine from, cost me more than that though, but I use to use it all the time when I had my sharan so paid for itself over and then some.

Agree with post above or you could just push start it to get it going, as long as you never got water into the engines fuel system you shouldn't have a problem, I new a guy who jet washed his cars engine and used the jet wash to clean his chrome pancake air filter.

A very informative post indeed 10/10 for effort. :)

it is the housing on the side of the head with 2 sensors attached to it and 3 torx bolts holding it in place.

When I use to give mine stick the oil would go upto 115 and the temp would sit just below 3/4, if I sat in traffic then the fan would kick in just before it reached a fraction over 3/4.

It is just the VW finishing touches I like over the ford plus a VW holds it's price better.

Have you slackened off the hand brake as that might be ajusted so stopping the piston to seat all the way home into the caliper.