bigdaddy

Never done it,,,but I can give you a good tip,,,,,, BE BLOODY CAREFUL :lol:

You need to program the two keys at the same time,,,,,,,,,, when you program the first key you have 15secs to program the new key,,,,, you need the red key to program the transponder chip in the new key to your PATS system,,,,,,,,or go to ford to do it,,,,,,,,

Is there a special ATF for the ford ,,,,,, only asking as we have a comma ATF fluid at work and it says on the can suitable for fords?????,,,,,am I safe to use this,,,or should I go to ford :blink:

Dont know about the connections,,,,but the blanking plate is available at halfords and probably good ice stores

NO I have not bought it ,,,,, not at that price ,,,,, now for another stupid question,,,,,in the picture which is the connecter is for the amp,,,,,cheers vr6galaxy ;) P.S very nice head unit,,,, :blink:

I can do that as well :P its called a wife :unsure: :( :(

Thanking you :unsure:

another stupid question,,,,,where would I buy the bypass lead :unsure:

Dont laugh but I bought a haynes and it says use a small screwdriver with a piece of cloth to protect the dash and prise it out :unsure:

you could ask the nice ford man to reset it an bung him enough for a couple of pints :unsure:

Hi Guys,,,,does anybody have a pic of the connecter from the amp to the speakers ,,,,,cheers :unsure:

I bought a laptop from ebay running windows 95,,,,

MATT,,,,,,I am not posh,,,,,I dont have upper storage bins :unsure: Cheers for you help guys,,,,,I will try a little gentle tuck if it dont come out ,,,,,then it can stay there,,,,,,cheers

Hi guys,,,,,,need to remove the big air vent in the middle of the dash,,,,,anybody know how I get it out,,,,,,cheers :lol: And before anybody mentions it,,,,,I did do a search,,,,,,and found nothing :unsure:

What type of radio do you have fitted ie; 2006,,2007..........I have a 2007 and there is a 4 amp fuse on the back of the unit,,,,,,,

How do you mean he reset it,,,,,,did he use wds2000,,or just diconnect it the reconnect it,,,,as I have the same problem as you had :unsure:

Cheers vr6galaxy,, No it did not go bang,,,,in fact it works great :lol:

Just found that it is a 2007R thats fitted,, not the 2006 as i stated earlier :lol:

Hi guys,,,,,,,,,Going to fit a nokia phone car kit,,,,,,,,Does anybody know the wiring colours for a rds2006 radio/cassette,,,,,,,,,, I am mainly after the memory wire,,,,,ignition wire,,,,,earth wire,,,,,, cheers

Here i found this for you from seatkid :o According to Ford the procedure is as follows...... Remote Transmitter Programming (410040) Note: A maximum of four remote transmitters can be programmed to the generic electronic module (GEM). Programming must be carried out at the same time for all the remote transmitters. Note: Before attempting to enter programming mode, make sure that the vehicle battery is fully charged and that the anti-theft alarm system is not armed or triggered. Note: If the programming mode ends with no new remote transmitters programmed, remote transmitters originally programmed are retained by the GEM. Note: After the first remote transmitter has been successfully programmed all the previously stored remote transmitters will be erased. Note: The GEM will exit programming mode automatically if four remote transmitters have been programmed or if no new remote transmitter has been programmed within the 15 second programming mode. 1. Close all the vehicle doors. 2. Note: Make sure the door lock cylinder is held in the unlock position for more than 0.5 seconds. Insert the key into the driver door lock cylinder and turn the key from the rest position to the unlock position three times within five seconds. 3. The door lock light emitting diodes (LED)s will illuminate for 15 seconds during the remote transmitter programming mode, allowing the remote transmitter to be programmed. 4. Remove the key from the driver door lock cylinder and aim the remote transmitter at the interior rear view mirror. 5. Press and hold the LOCK button on the remote transmitter. 6. While holding the LOCK button down, press the UNLOCK button three times on the remote transmitter. 7. Release both buttons simultaneously. 8. Make sure the door lock LEDs flash five times, confirming that the remote transmitter has been programmed. 9. After a remote transmitter has been successfully programmed, the GEM will reset the programming mode, allowing a further 15 seconds to program the next remote transmitter. 10. To program additional remote transmitters, repeat steps 4 to 8. 11. Make sure that all the doors lock and unlock, confirming that the GEM is no longer in programming mode. 12. Test all the programmed remote transmitters, by activating and deactivating the locking and unlocking functions.

Do a search this as been covered many times

On my 98 model,,,,i twisted clockwise for off,,,,,anticlockwise to put on

could you not try and disconnect the battery for a few minutes,,,,,,it may reset it self,,,,,,dont know :ph34r:

KP 115,,,,,,Hi and welcome to the forum,,,,,sorry I cant help with the info you seek,,,,,but I am curious about the modification you are planning :ph34r:

I have taken the panel off,,,,to see the amount of space available,,,think I would be safer to fit a quality set of 6.5" speakers,,,,,,, :ph34r: