bj2004

thats great thanks

hi my wife had a little bump has anyone got a lamp unit for sale or know the best place to get one thanks john

not the first time reverse hasnt worked then (:

great idea would be happy to help

check the oil level in gearbo

have a look here Vag com FAQ or here USB Issues

if things look too good to be true they usualy are

Price of oils going up but doubt the fact it came down more will affect that they will just bang enen more on

think its been mentioned on here befor seems you are better off with rubber valves as the seal on the others is a known fault

hi the kit i got had the wireing harness with it you get stalk cables and instructions for abou

hi one way to tell is start engine and rev to 2000 then keeping revs steady press brake pedal if engine slows to idle your ecu will take a cruise control i dont know if its same for petrol i retro fitted mine using a kit from e-bay dead easy only 5 wires

hi i believe they need to be enabled via vag com or similar ask your dealer to confirm its been done

i mounted mine above my sunglasses holder in roof and took a feed from map light

hi check the earth points for the headlight unit and also earth point at rear side/ brake light point also check wiring to rear light cluster

no heated front/rear screen etc round the side

i find halford a bit like pc world find a good motor factors but always check the dealer ford seat vw

pm me i think i may have a spare copy

ok whats your real name ? if it was me my first job would be to buy a couple of remote keys off e bay and get them programmed how many keys have you ? if you have 2 then you can program the new ones yourself for pats saving a fortune although not sure if you can disable existing keys without using vag-com or a dealer next would be to confirm all oil and filters were changed when you bought it then check brake pads and disks if you stick around here you will soon see what else can go wrong and check how your bits are

dont know if this helps but www.cpc.co.uk are selling it at a good price and i think they do mail order part no CP04592

hi ive not been a member long but ive always found people to be willing to help whenever they can and respond with factual imformation and from there own experience, some members obviously have huge personal knowlege that we draw on regularly others like myself can only offer generic advise it would be a shame to loose good members because what appear to be a minority of people feel they know best and say so in an unnessessary way perhaps because of the type of vehicle we drive many of us are a little more mature and this is reflected in our posts keep up the good work people and thanks

hi you need to get a new surround look in the FAQ not very expensive iirc The part number you need is F1319217. Only

if you want to call in here i will have a look for you cant promise anything but will try pm me if you want

wd 40 is good for some things but i would never use it round the ignition system if you get it on leads etc it can form a sticky residue and the high voltage attracts dust and sticks to it then if it gets damp it is worse than it was befor

thanks for that i couldnt find it in the manual

can anyone tell me how much fuel is left when warning light comes on? thanks