Siezed Front Abs Sensor

[KevC]

Hi , I have a abs light on and with vagcom I have located it to the drivers front, it will not reset so Its time to change,how ever it is seized in the hub, how do i remove it Thanks

[chrispb123456]

You may have to drill the old one out, is the reluctor ring still intact around the drive shaft, they have a habit of rusting through and falling off.

[octo0072000]

as above drill it out just had to do one on the rear of mine,

you could try blowing round the senser with a air line

Mine had picked up a small bit of magnet but could not clear it so new senser loads on fleybay