NikpV

certainly true with the mk2 but dont know about the mk3 yet

Please add a post to this thread with a link to the post you think should be added to the faq. Please DO NOT post the info here just put a link to the relevant post (even if you have to post it yourself. Thank-you

Here is the start of a set of links to useful posts from the forum Thanks to all the original posters and the time they have spent making these posts all I am doing is collected together all the links from this thread into one place 1. How to program remote keys To add further links to this thread now it is locked you should Add to this thread here One of the moderators can then add the post to the FAQ section and delete the request post. To all those who post pictures to threads which may be included in the FAQ, could you please upload the picture rather than link it. I am aware that storage and bandwidth for the site will increase but it doesn't rely on other sites being up and available. You can edit the post later to upload the picture if it subsequently appears in the FAQ if the site setting prevent you then PM a moderator/admin and they can sort it for us.

its held on with barbed/bayonet clips which fit into rectangular housing depending how brittle these have become over time you may break the odd side off | o------ ------\ | ------/ | | o------ bayonets on case on left above rectangular housings on right - only way is to prise it off

http://www.fordgalaxy.org.uk/ford/style_images/silver_blu/spacer.gif somebody confirm it works and I'll add it to the faq

get someone to lean on bonnet whilst you operate catch - possibility

umm best price for a ca based 95ah 760a cc I could find was

ok - cant get the calcium variant at any of the places I've tried - I now have the calcium one from ford - cost

I am trying to replace the battery on my 2001 1.9PD its marked up as a Varta 760A 95Ahr and its large - going to Harrison ford in Peterborough or Huntingdon they say they cant match this - the best they can do is a 80Ahr :D at

ok it was this kit from this seller numbers were from the little box inside the big box

rear brake pads IIRC

sorry only got this box left ... dont know of design changes but there are different disc sizes .... all on the 16i wheels

not sure which numbers you want but here y go - straight off the mintex box mdb 2118 wva 20961 172 or 90r-01021/589 one pad on each axle has the wear indicator

did anybody mention the wires oh or maybe its the wires

ours went at 35k - new one under waranty ... phew

item 27 in the faq gives you this

look here same colour as ours

item 7 in the faq reccomend that you get another key because you can program the pats as well whilst you have 2 - saves an

glowplug light flashing (engine management light) - first port of call check the switch(s) on the brake/clutch pedal - if its got cruise control - does it work (non working may indicate a problem with the switches, if the switch is on all the time it may well be sending contrary signals to the ecu, may give you problems driving)

poor s*d :lol: :lol: :lol: :lol: :lol:

umm does any of the mk1 or mk2 variants have self-levellng suspension ?? never herad of it or seen it mentioned here

look for external links in the faq - servce schedules there

since its going into limp home mode I think you need to get the dtc codes read