KevC Posted May 15, 2012 Report Share Posted May 15, 2012 Hi , I have a abs light on and with vagcom I have located it to the drivers front, it will not reset so Its time to change,how ever it is seized in the hub, how do i remove it Thanks Quote Link to comment Share on other sites More sharing options...
chrispb123456 Posted May 15, 2012 Report Share Posted May 15, 2012 You may have to drill the old one out, is the reluctor ring still intact around the drive shaft, they have a habit of rusting through and falling off. Quote Link to comment Share on other sites More sharing options...
octo0072000 Posted May 17, 2012 Report Share Posted May 17, 2012 as above drill it out just had to do one on the rear of mine,you could try blowing round the senser with a air lineMine had picked up a small bit of magnet but could not clear it so new senser loads on fleybay Quote Link to comment Share on other sites More sharing options...
vroomok Posted January 7, 2022 Report Share Posted January 7, 2022 thank you very much it can help me Arrows RC jet Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.