leee Posted February 25, 2012 Report Posted February 25, 2012 i hav a mk1 2000 plate back wiper dont work bought a second hand 1 still dont work checked fuses ok checked relay were wiper relay should be there isnt one not even a conection to put one there so it said in my owners guide an r21 aswell the relays are numbered different could sum 1 if possible help thanks Quote
chrispb123456 Posted February 25, 2012 Report Posted February 25, 2012 I would check the wiring to the tailgate through the gaiter first, it's common for the wires to break in here causes all sorts of problems Quote
zorgman Posted February 28, 2012 Report Posted February 28, 2012 i concur. but put a new bit of wire in dont join old wire together its too brittle and will go again. if you cant solder use a inline joint theres enogh flesx to pull out of car/hatch so it only flexes on wire, check other ones while in there. Quote
pearly king of surbiton Posted February 28, 2012 Report Posted February 28, 2012 (edited) 1.trace the broken cable by colour back into the rh side plastic removeable cover. 2.pull a new piece of cable up to the tailgate through the rh pillar through the rubber trunking and into the tailgate. 3.join the cable using elecrical tape in the tailgate and boot, do not join at the rubber boot or the problem will recurall the bestjohn Edited February 28, 2012 by pearly king of surbiton Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.