NikpV

ok let us know how you get on - all adds to the knowledge base here ;)

When I changed the glowplug on ours I was disappointed to find the one I took out was fine but the connection was just a little loose, at the time I thought it would have made enough of an electrical connection not to be o/c. On closer examination both the supply and the earth are in that single connection the earth DOES NOT run through the heater so that connection has to be TIGHT otherwise you get the o/c dtc. Incidentally we didn't have to have the fault cleared before it started working again. Might be worth 30 mins to check again ;)

out of curiosity - how have you checked ?? ;)

oops 45 secs difference ;) :D

;) :D 215/55 r16 :D

I've read somewhere that vw is cheaper than fords for the fixings ;)

spot on mate - I had a bit of trouble getting a validating e-mail and registered at work to pm gteuk about it ;) :D :D

Has the timing slipped a bit?

Specifcally here

Fittings are about

:D :o :D

immobilizer / GEM problem ??

have asked before Earlier thread now looking at altera from the roofbox company

Is it coming from the main exhaust or from the little aux heater exhaust pipe just in front of the nearside rear wheel ?

can he add the eyelet holes or is there a way of doing that ourselves - I find that there is less chance of rubbish getting under if they are pinned down

When you turn the key do you hear any clicking ?

Yeah I remember the posts about it

No we haven't got much to go on, we don't yet know if any of the dashboard lights come on :D

It stops the buckle smacking the window as you throw the car through the chicane(sp) :D

When you unclip the seatbelt from the floor it retracts and clips into this recess :D

congrats ... :D

No these are for rear seats :D

Ok assuming you are getting lights on dash but when you try starting in the cold you get absolutely no noise no clicking, if so the starter solenoid becomes suspect, some sort of expansion/contraction problem in the driving circuit for this solenoid (heavy duty relay), temperature somehow affecting the solenoid itself. Best I can do with current info :D

Thats a versalility pack for you :D :D

go on - see how he reacts to a valid question :D