mark1rev

hello all i have a 1999 2.3, the oil tentioner broke engine still runs but getting very rattly.phoned fords for part its

help

hello can anyone tell me how to remove the dip stik holder please its on a 2.3 galaxy

:D any 1 know of a good machanic in or around portsmouth ? as im after someone to do my chain tensioner and guides on my 2.3 gal. or someone who would help me do it for cash ? the haines manual sounds easy enough but i would rather have some help as im not to sure thanks

update -- oil lights been off all week only came on again yesterday still for about 2 min

do the tentioners go where the oil is ? i thouht the chain and tentioners were seprate ie on outside of engine

what do these cam blades do ?

hi all have been having problems with my 2.3 gal, oil pressure light keep coming on, yesterday removed sump to clean pick up tube and there was plastiky sort of bits in the oil pick up hole ? looks like its broke off somewere in engine .when i replaced sump and started it up oil light was still on and realy rattling then after about a min light went off and engine was very quiet . it seems to do this and a couple of times a day. the only other thing that it was doing before was a rattling chain noise but now this seems to have gone. other than that it still drives ok when light goes out and is no more rattling chain

hi has any 1 got a picture of how the cam chain and tentioner goe s on a 2.3 gal as i might atempt to change as its still rattling thanks

hi all just had mot and its got some advisories on, this is whats on it measurements: rbt park brake efficiency : 17% advisory item: parking brake your vehicle has only just met the required park brake efficiency. it would appear that the braking system requires ajustment or repair.. how would i go about checking rear brakes and fixing ? the hand brake lever only comes up about 1"

help

hi is it easy to replace the cam chain tentioner on a 2.3 galaxy , as mines still rattling and i would like to try and replace tentioner myself. i have looked at haynes manual but its not realy clear to what i should do? the manual sais about jacking engine up is this normal ? thanks

hello every 1 and a happy new year, changed my battery today as old 1 kept loosing charge, when i put new 1 in and started it just starts then cuts out if i keep my foot on accelerater it keeps going but wont tickover ? i disconected it again for 30 min then tried again but still the same, it drives but wont iddle. im thinking of cleaning the idle control valve but would it be this as i only swopped the battery over ?

hi i have the same problem, the garage said do a oil flush then new thicker oil and a top end treatment, cost me

hello i have a 2.3 gal 1999 its started to make a rattling noise from top of engine at the chain end, i have had the oil flushed out, new oil and a top end traetment put in. it sounds like the chain is going loose then tight but other than that its still running good. is it easy to change the tentioner and is it up the top of engine ? the tentioner is

i have just called ford and thay say it is relay 35 for the fuel supply is this right ?

it does sound like relay 30 i had the exact same problem but just to be sure i changed relay 167 aswell new relays in and no problem since. whats relay 167 please

went to work today and it started 1st time ? i can hear the fuel pump when i turned key this time, but last night i didnt hear it

relay 30

turnes over normaly and the led flashes fast , when you stop turning over it beeps twice

hello my t reg 2.3 gal is sat at work and wont start parked up in morning and went out after work and it wont start, it beeps 2 times and just turnes over ? any help please

sorted out now changed wires wasnt that so spare set now, when i undid motor and other bolts on door it worked jamed motor i have oiled all moving parts in door now just hope it keeps working

im going to get the wiring from fords and a motor from euro car parts i think thats the best thing ;) thanks for your help

i have tried euro car parts the motor is less than

phoned ford thay say