joczeze

Can anyone send me some electric scheme ? Thanks

Hello PJK I try to buy it, but sart to be dificult. Maybe because I

Hi all Still not sole this problem. Does anyone can help me, may be with some photos of the cables and where I can find it. I believe I do not have the cables. I will have to put it. Does anyone know how can I do it ? Thanks

Thanks, but can you give me some more details or contacts ?

Hi people Can his help: http://euro.evisteon.com/uploads/euro_docu...instruction.pdf or http://euro.evisteon.com/uploads/euro_docu...t_Fitt_Inst.pdf

not sure about the plug shape or the cables colours on the photo? do you have head light washers jets? that could be the plug for the pump for those? from my wiring diagrams pre 98 should be plug C203 brown/white and brown/blue post 98 again C203 yellow/black and brown any chance of a picture of the sensor? No I do not have head liht washers, I also had think abot that. The sensor they sell me are diferet from the ogiginal plug ( on photo) I had buy a new plug, and connect it. Nothing change. The colours are rd and brown. Can you see if this is to the head light washers jets and wat colour they should be ? Thanks

yes I did. I have a sensor wand cableas are one red and other brown. I will send you a photo of that taken today during instalation. Thanks

Hi, vr6galaxy how many plugs are there on the back of the new clocks and how many do you have to plug in? Well in back of the clocks I have 2 plugs, one red and one black and both are conneted. Do you mean tha I should have another connector to plug the sensor ???? (Sorry for my english). Thans

Still cannot put that working. Does the sensor need to be actvated with VAG-COM ? If yes does anybody tell me how ? Thanks

Hi, vr6galaxy Thanks for all information. I have there plug (357972762) with 2 cables, one red and other brown. I was thinking that was this, but the plug are diferent from the sensor (7M0 919376) and i believe that I need a plug like the 7M0 973202. Are the first (357972762) been replaced by the Last one 7M0 973202. Thanks

The problem is not the hole in the bottle. The problem is that I expec to have there a cable to connect the sensor, but I cannot find it. Thaks

Hi all. I had to change the instrument cluster of my 1.9 Galaxy, 1998. i decide to put one with board computer, but now I have the light of te washer bottle always on. I decide to correct this, and brought the sensor. After this I find that I d nor have the place to connect it. Des anybody can help me and tell me how to connect it ? Thanks

Hi It is very easy to do that. The stalk can be seen and buyed from here http://cgi.ebay.de/ws/eBayISAPI.dll?ViewIt...4563613648&rd=1. The instrument panel must be all change, but t is also very easy to do. To activate all you will need vag-com (ross-tech). Make a surch o find software. You also need the cable. If you needsome help send me a PM. I have done exactly the same. Thanks

Hi everbody Still looking for the console. Thanks for the numbers, but still can not find it in Portugal.

Thanks Hijacker Your last information is very interested. Can you explain it better, how to do ? I would like to put it close the doors when at about 20 km/h and unlock when take out the keys. Is it possible ? Thanks

Hi I have use vag-om for the first time today. I go this error in my 1998 tdi MK1 galaxy. Address 09 ------------------------------------------------------- Controller: 7M0 962 258 B Component: Multifunkt.Einheit 0001 Coding: 00005 Shop #: WSC 00020 1 Fault Found: 01142 - Central Locking Motors: Driver Door and Tank Valve Locked 28-10 - Short to B+ - Intermittent Does anybody knows how to solve it ? ( I had clean it, but I think they will coe again) Thanks

Hi Dally Thanks for the photo and information. The problem is that I

Hi Dally It is that my idea, however my Galaxy are MK1. I believe that are the same piece. Can someone tell the email or web of Scrappies. Thanks

I

Dear Sir You must have two LCD displayers. The trip computer is the LCD in t rpm painel. Regards

Dear Sir You need to change painel. And also connect the 2 coonetors that are there (now there are only one connect). Its very easy. I have done it myself, and also activete the cruise control. The only problem is that if the painel you are going to put are not a new one, you can not put the rght kilometers or miles. Regards

Hi all Because i had an acidnt, I had to change the instrument cluster. Now I need: I have the air bag light always on. How can I solve this ? Anybody can help. The other one is the milage correction. thanks

Hi I had to change the instruments painel of my galaxy 1998 TDI 110 hp. I had buy a second one in ebay. Now I need to put the right number of kilometers in this one. Is it possible ? How can we d it ? Please help me Thanks

Hi I wish to upgrade my painel instruments of my Gal TDI 110 hp 98 (MK1), to a new one with trip computer. Can anybody tell me if this is an easy thing, or require very good aknowlogde. I recently make the Cruise control upgrade an it was really easy, however in Ford they say they want do it, because it was very complicated. Please help, with some instrutions or links. Thanks

Thanks George This is what I wish to do in my galaxy. I know it is possible, but i do not know the vag-com codes for that. If anybody can send it I will be very gratefull. Thanks