gizmo.john

have a look in the rubber boot wiring to bootlid they brake and touch each other making side light dash light up.

HI familyman with your cv joint out the hub, get the cv bolt and wind it back into cv joint keeping your cv straight, this will pull it of you have to screw it all the way in, hope this help.

Wanted mk2 headlight levelling motors.

I have a mk2 its 288mm front disks its a 02 reg with zetec wheels,which are the same as mk1 zetec 1999 on. so I would say yours has the bigger 300mm disks.

its a ten minute job if you leave it in place and just take the wiper arm of and take c clip of, wd40 and with the wipers switched on high speed put pressure on the top of the linkage and spray wd40 at same time, once the spindle drops out you can grease it put it back together job done ten minutes.

this is how I do mine only take just over 30 minutes do it twice a year, that way you no that your wipers will not let you down in the winter.

if the towbar was fitted to 1999 on then it will fit a mk2 without cutting the bumper.

scraped it about 31/2 months back just after I got my mk2 mate I didn't get the one I was having the lpg of he sold it to some one else.

go to Clwyd breakers my old mk1 is still there and its in the back I was there this morning and got my bulbs out of the clocks blue bulbs I forgot about them when I scrapped it.

don't waste money and time on ebay as in time they will be the same as yours just take a look at yours and solder the joints and it will solve your problem.

you can change the gear selector on top of the gearbox had to change mine on my old mk1 could only get 1st&2nd, takes about 45 minutes to change.

http://www.ebay.co.uk/itm/281048174838?ssPageName=STRK:MEWAX:IT&_trksid=p3984.m1423.l2649 This is the part that burns out, its worth doing the job wright first time by buying one of these and doing the ends of the cables as they get hot and only burn the fuse box out or it can go on fire.

hi gaz struts of a mk2 will fit a mk1, I will be breaking a mk1 next week if you need parts and I also live in Wrexham.

very easy mod done it on my old mk1 about 5 years ago and cost less than a tenner of ebay.

if you have the later type fuse box mfu then this can be done with vagcom also auto door locking when you go over 15mph.

the proper mk2 aero are straight as well hope this helps.

this is what you nead it very easy to put on, take your cv joint of, take old abs ring of, clean were the ring goes, then heat the new ring with a blow tourch till its red and then put it in place let it cool and its ready to fit the cv joint back http://www.ebay.co.uk/itm/FORD-GALAXY-ABS-RING-ABS-RELUCTOR-RING-DRIVESHAFT-ABS-RING-/140633741072?pt=UK_CarsParts_Vehicles_CarParts_SM&hash=item20be6c9710

hi sparky my mk1 t reg 1999 did the same with the wipers park also my mk2 02 reg does the same. on the mk1 I cut a bit of the trim away and with the wiper in park you couldn't see it, I also tried 26'' wipers but they done the same.

yes Gav still got surround and window switches.

my old mk1 2.3 zetec 1999 t reg had them and my mk2 2.3 02reg has them.

http://www.ebay.co.uk/itm/130888916826?ssPageName=STRK:MESELX:IT&_trksid=p3984.m1555.l2649 mk1 galaxy

morrettes mk1 galaxy twinlights for sale £130.00+ p&p

on mk1 & mk2 its under passenger seat have a look under yours.

how much for the tow bar

still got some parts left what are you after ?