Front Shock Strut Bearing

[bamjam]

Hi all

Have followed your topics with great interest and have gained alot of knowledge from you guys and have attempted many jobs on my Galaxy 2003 Ghia Auto with success. Thank you all for you info and posts

Need your advice I have removed pass shock and noticed the strut bearing has completely disintegrated, not sure when refitting if the bearing goes below the lower plate on top of the spring or above the plate. Also the abs brake pad connector wire is or was pulled from the plug marked 1 2 3 4 not sure the  corresponding wire colours red 1 yellow 2 brown 3 blank 4.

Any suggestions would be  a great relief.

Many thanks 

[niall1001]

Above the plate under the nut mate,not sure about the plug tho mate

[niall1001]

Hope this helps mate

[chrispb123456]

Hi all

Have followed your topics with great interest and have gained alot of knowledge from you guys and have attempted many jobs on my Galaxy 2003 Ghia Auto with success. Thank you all for you info and posts

Need your advice I have removed pass shock and noticed the strut bearing has completely disintegrated, not sure when refitting if the bearing goes below the lower plate on top of the spring or above the plate. Also the abs brake pad connector wire is or was pulled from the plug marked 1 2 3 4 not sure the  corresponding wire colours red 1 yellow 2 brown 3 blank 4.

Any suggestions would be  a great relief.

Many thanks 

Am assuming it's the wires pulled out from the plug on the actual ABS sensor and wear lead not the socket it plugs into on the car.

This is what shows on both ford tis and elsawin but im sure it's referring to the socket and not the ABS plug

ABS.

1.Grey

2.Brown

 

Wear lead.

3.Brown.

4.Brown

 

Let us know if the colours don't match and I'll have a look at my car and take a photo of it.