Jump to content
Ford Galaxy Owners Club

Recommended Posts

Posted

Does anyone have a pic that can show exactly where to find the speed sensor on a mark 2?

I've been told its located on the top of the gear box by the selector but cannot locate it

  • 2 weeks later...
Posted

I don`t have a pick ,just changed the crankshaft speed sensor it`s just to the right below the oil filter base on the front of the engine block it has a light grey connector  ,hope this helps 

  • 2 weeks later...
Posted

OOPS REPLACED CRANKSHAFT SENSOR INSTEAD OF THE SPEED SENSOR .IV`E NOW FOUND THE SPEED SENSOR ,HAYNES MANUAL SAYS IT`S A TWO SPANNER JOB ,IT`S NOT ,THEIR PICS SHOW A GEARBOX ON THE FLOOR WITH IT CLEARLY VISIBLE IT`S, NOT ,IT`S UNDER THE BRACKET THAT HOLDS THE GEAR CHANGE CABLES ,I REMOVED THE WATER TOP UP BOTTLE ,FUEL FILTER,PIPE TO THE EGR VALVE TO GAIN ACCESS TO THE THREE BOLTS HOLDING THE GEAR CABLE BRACKET,ONE OF THEM IS A REAL PIG TO GET AT ,THEN GOT UNDER THE CAR AND UNBOLTED THE SENSOR AND REPLACED IT WITH A NEW VW PART ,FRAUDS WANTED

Posted (edited)

have a look though here

 

http://www.fordgalaxy.org.uk/ford/index.php/topic/26272-speedometer-not-working/?hl=speedo

 

If whats posted there is correct its done off the abs sensors. At a guess you might have found the reversing light switch?

 

Either way do you have an abs light lit (if not does the abs light come on when you first go to start? if not then either the bulbs blown or missing?) Or any faults shown if you look with VCDS ?

 

Edit

 

And if not have a look at this

 

http://www.fordgalaxy.org.uk/ford/index.php/topic/16434-19tdi-lost-your-instruments-then-read-this/

Edited by BrianH

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

Loading...
×
×
  • Create New...