Jump to content
Ford Galaxy Owners Club

Recommended Posts

Posted

Ive a 1998 2.3 petrol galaxy with no ignition lights or switched power going to relay 30, also have no indicators. the engine turns over fine but wont start.

i currently have half the dash dismantled , everything else works, lights, wipers etc  

can any body help?

 

cheers Dave

Posted

Check Fuse 14 (20A)

 

Other possibilities are F13 (3A), F16 (20A) and F32 (3A)

Posted
Hi Dave I also have 97 2.3 gia X, when I bought her the battery was loose and had been sliding side to side, this had messed up the small wires on battery terminals, I had poor connectors on end of wires and had to re-solder them, even lost window wipers because terminal on battery had come loose, so your problem could be one of the terminals.
Posted

cheers for your quick reply but is this for the early type fusebox? sorry its a 1997 not 1998 galaxy, taa

 

Now he says.... :glare:

 

No, info was for 98->00 models.

 

Well.... today I'm just not in the mood.... :P

Posted

Check F18 (10A)

 

Otherwise it looks like an ignition switch/wiring problem.

 

Also worth check if any of the smaller wires have not broken off the positive battery terminal.

Posted

thanks guys, for your replies..

 

i have check all the wires at the back of the ignition switch, tested okay and also traced them back the fuse box, where they tested okay. have also tried a different fuse box.

 

do you happen to know what the pin number is for the switched live on relay 30 or the wire colour? then i may be able to trace that to a possible break.

 

cheers for your help so far :)

Posted

Can't be sure but I think the power side (contacts) of the relay are RED +12v in and Black/Yellow out.

 

I think the +12v power from the battery goes through fuse(s) in the Battery junction box, which is located forward of the battery.

 

There are several live feeds from the battery +ve terminal via small gauge wires and several members have had wires broken from the crimped connectors (or nor reconnected after major work).

Posted

thanks, have checked everything, as far as i can see..

 

have now tried by passing the the relay and do get ignition light and indicators :) but wont start :(

 

does this relay power up anything else?

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

Loading...
×
×
  • Create New...