Jump to content
Ford Galaxy Owners Club

Recommended Posts

Posted

I have a ford galaxy 2004 1.9 tdi with 84K on clock, initially it had an intermittent fault, one day behaving normal other day trouble, but after few days I think fault has become permanent, cold or hot car start with first flick, but rav never goes above 3200RPM, if you pull the car it pulls like normal car as until rev goes to 3200RPM, after 3200RPM it behaves like misfiring or hesitating to catch speed, if you keep driving below 3200RPM, after 2 miles misfiling and hesitation starts becoming intense until to a stage car stalls, wont start again straight away unless its cold.

 

Been to ford they says no fault code. They don

Posted

I would go for changing relay 109 (third layer in fuse box) when this is faulty it will not leave a fault code.

 

 

Chris

 

 

can you please explain your thinking on this one?

Posted (edited)

What about the EGR valve? I had my Alhambra do something similar and someone suggested that might be the cause. I gave it an Italian tune up and it seems to be OK now though.

 

Oops re reading the original post properly I see you've tried that. I did try to delete this post but found I couldn't.

Edited by Crickleymal
Posted

I would go for changing relay 109 (third layer in fuse box) when this is faulty it will not leave a fault code.

 

 

Chris

 

 

can you please explain your thinking on this one?

Hi BJ thank you for your interest

 

MPL started off by saying intermittent and now become more permanent, and the not starting when hot could be associated with a faulty 109, he has also changed many expensive parts already so replacing a

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

Loading...
×
×
  • Create New...