notthemomma Posted May 26, 2011 Report Posted May 26, 2011 Hi sorry if I have posted in the wrong place. I have Today bought a 2003 Alhambra. I am getting a wobble under acceleration. Would I be right is supecting Drive Shaft? Thanks in advance Quote
chrispb123456 Posted May 26, 2011 Report Posted May 26, 2011 Hi and welcome to the forumYes good possibility CV joints/driveshafts or worn suspension bushes, track rod ends, wheel bearings. Quote
andymet Posted May 26, 2011 Report Posted May 26, 2011 Hi and welcome to the forumYes good possibility CV joints/driveshafts or worn suspension bushes, track rod ends, wheel bearings.Hi Almost certainly drive shaft inner cv joint. They have them at europarts for Quote
gregers Posted May 26, 2011 Report Posted May 26, 2011 have you checked that the wheels nuts are all tight? private sale or from dealer? Quote
Mirez Posted May 30, 2011 Report Posted May 30, 2011 What size alloys are on this? If its the stylance 17's then you need to double check the balancing. The larger the alloy the more critical the balancing becomes, poor practice by a lot of the quicker shops is to shove the balancing weights on just the inner edge - whilst this will technically balance the wheel at the low speeds used on the balancing machine, the forces generated on a larger wheel during acceleration will concentrate more toward the center and will show up this practice as steering wobble. Check where they have positioned the weights, they should be on the inside and outside of the wheel, if stick-on weights are being used then they should be positioned in behind the spokes (as close to the face as posible). Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.