tezerez Posted March 18, 2011 Report Posted March 18, 2011 Hi, First question to this excellent forum.The reverse sensors on my 53 reg TDI130 have started playing up!I often get the long beep and flashing light switch, but sometimes (whilst actually reversing)the noise stops and the system works. Sometimes it just works, Other times it works at the front, but doesn't sense the objects near the rear sensors. The ecu is dry, I have replaced the rear loom with a tested one from the Polish guy on e-bay. The lenses are clean.Before I start buying new sensors (cheapest seem to be Quote
chrispb123456 Posted March 19, 2011 Report Posted March 19, 2011 (edited) Check with VagCom first may save you time and money on sensors, the flashing light is indicating a fault on the system. Edited March 19, 2011 by chrispb123456 Quote
tezerez Posted March 19, 2011 Author Report Posted March 19, 2011 Thanks for that, have got a lead on order.Will have to do research on forum to see what to look for. Quote
tezerez Posted March 20, 2011 Author Report Posted March 20, 2011 Me Again, Anyone any ideas what to look for on vag-com (actually vcds lite) to find out which bit is faulty?Does it let you know either ecu or sensors ?Thanks in anticipation. Quote
tezerez Posted March 22, 2011 Author Report Posted March 22, 2011 Hooked up to vcds-lite (after a few false starts) and it not only showed fault, but which sensor causing prob!Back to fleabay for new sensor, then hopefully back to safer reversing.Thanks for help. Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.