jamesey Posted February 10, 2011 Report Posted February 10, 2011 hi when i bought the gal the led had been pushed down in the door so i took the door panel off with dificulty :rolleyes: and found the led on the wire and put it back in and built up , then i tested it and hey presto it didnt work , ive looked under the rubber in the door and i cant see any broken wires ,what should it read on a meter or is there anything else i can try , i need to prog a key up but need the light to see its in the prog mode , thanks Quote
gregers Posted February 10, 2011 Report Posted February 10, 2011 i would recheck the wire for any breaks. Quote
LZDEN Posted February 17, 2011 Report Posted February 17, 2011 hi..yes have another look for any broken wires..on mine (mk1)..i think the wire was white/red under the door rubber boot,it had broken stopping the LED from working. :lol: Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.