snowytop Posted January 9, 2011 Report Posted January 9, 2011 1.9 tdi 1997 Morning everyone, Snow returned here the other day and this time the old gal had had enough and decided she didn Quote
zorgman Posted January 9, 2011 Report Posted January 9, 2011 on the busbar you'll find 2 cables going into it so it splits the load you can cut the 2 wires then feed 2 plugs per wire using bullets asyou describe Quote
snowytop Posted January 9, 2011 Author Report Posted January 9, 2011 Thanks Zorgman I appreciate the advice, that Quote
zorgman Posted January 10, 2011 Report Posted January 10, 2011 the ecu cuts off supply to stop sol after 5 secs after ign switch on but puts supply back on soon as you crank or the ecu senses that the engine is turning if it didnt no bump starts.bit awkward to solder the female bullets on unless you can remove some of the insulation but males no prob always better to use a correct size crimp tool Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.