Jump to content
Ford Galaxy Owners Club

Recommended Posts

Posted

New to the forum hope you guys (& girls) can help, my 2001 1.9tdi heater isnt working at all, the heater blows at the correct speeds but no hot air despite engine coming up to temp, been to local garage who have replaced thermostsat & drained/ refilled coolant & have bled it about 10 times, if the car is left idling then there is "warmish" air but as soon as the car is moving it blows cold.

 

The car did overtemp in the summer, temp went straight to the red when I was doing about 70, let it cool down & topped it up and it did it again in October at the same speed, dont get the chance to do those speed very ofetn though as the car is mainly used on b roads in depths of Norfolk, could this be related to the heating fault?

 

Have read with interest all the threads on aux heaters (which also isnt working but I wil look at later) but cant find much on the main heater

 

Thanks in Advance

Posted

New to the forum hope you guys (& girls) can help, my 2001 1.9tdi heater isnt working at all, the heater blows at the correct speeds but no hot air despite engine coming up to temp, been to local garage who have replaced thermostsat & drained/ refilled coolant & have bled it about 10 times, if the car is left idling then there is "warmish" air but as soon as the car is moving it blows cold.

 

The car did overtemp in the summer, temp went straight to the red when I was doing about 70, let it cool down & topped it up and it did it again in October at the same speed, dont get the chance to do those speed very ofetn though as the car is mainly used on b roads in depths of Norfolk, could this be related to the heating fault?

 

Have read with interest all the threads on aux heaters (which also isnt working but I wil look at later) but cant find much on the main heater

 

Thanks in Advance

Hi and welcome to the forum

As has been suggested by Adie water pump impeller has fell off.

Advise changing cam belt and tensioner and water pump as it's all got to come off to do the pump.

Posted

Thanks for that will start looking into it, out of interest if the impeller has fallen off what is pumping the coolant around or is it as with everthing on the Galaxy a simple system made complicated!

 

Also where do you get a workshop manual?

Posted

Thanks for that will start looking into it, out of interest if the impeller has fallen off what is pumping the coolant around or is it as with everthing on the Galaxy a simple system made complicated!

 

Also where do you get a workshop manual?

Posted

Thanks for that will start looking into it, out of interest if the impeller has fallen off what is pumping the coolant around or is it as with everthing on the Galaxy a simple system made complicated!

 

Also where do you get a workshop manual?

As you may have read these engines create very little waste heat thats why they rely on the booster heater for quicker warm up, when the impeller falls off you wont get any pumped circulation and then overheating when engine under pressure on a motorway.

You will also probably find that your electric run on pump has packed up as well this will need to be checked when you decide to sort out the booster heater as that will not run correctly without it.

There's not a haynes manual for the MK2 but there are CD's usually on Ebay that will work on an XP computer

  • 1 month later...
Posted

Thanks for everyones advice on this, from joining this forum I have discoved the Galaxy heating system is indeed complicated % unreliable, since my original thread I have fixed multiple problems with my heating inc run-on pump (new brushes)/ blower not working speeds 1 & 2 (repaired heater resistor pack) & aux heater not working (large red wire at heater repaired)

 

However still have the same problem so looks like I'm going to have to check the water pump out, this however would be a garage job (many

Posted

Thanks for everyones advice on this, from joining this forum I have discoved the Galaxy heating system is indeed complicated % unreliable, since my original thread I have fixed multiple problems with my heating inc run-on pump (new brushes)/ blower not working speeds 1 & 2 (repaired heater resistor pack) & aux heater not working (large red wire at heater repaired)

 

However still have the same problem so looks like I'm going to have to check the water pump out, this however would be a garage job (many

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

Loading...
×
×
  • Create New...