52 Plate 1.9 Tdi Temp Sender

[jimbob007]

Hi i have a 1.9 TDI on a 52 plate, is there a easy way of getting access to the temp sender at the rear of the engine its held in with a clip but you cant see it, maybe ford just made it hard to do lol, im changing mine as it cant seem to make up its mind how hot the engine is, thanks. Jim Edited May 2, 2010 by jimbob007

[chrispb123456]

Hi there looking at the pictures I would say its easier from underneath

[jimbob007]

Hi there looking at the pictures I would say its easier from underneath

 

Hi thanks for that, I didnt know if they had a panel in the inner wing like the focus that you can remove to get access, ive tryed it from top and bottom and it looks like its just going to be a pig to do, never mind thaks again

[bigtee]

hi there its not that difficult to do just remove the fuel filter or water bottle to get your hand on it the clip just pulls off by hand and the sensor pulls out just make sure you get the same part good luck

[jimbob007]

hi there its not that difficult to do just remove the fuel filter or water bottle to get your hand on it the clip just pulls off by hand and the sensor pulls out just make sure you get the same part good luck

 

Once again there is always someone out there to help, thanks alot i changed the sender yesterday and it took about 30min and the gauge is working fine now, thanks for all the advise,