jamesey Posted February 19, 2008 Report Posted February 19, 2008 hi when i open the doors on my 1996 alhambra it lights a door up on the little in dash car but the drivers door doesnt does anybody know why , all my interior lights work with all the doors even the drivers door so i know all the pin switches are ok/??? Quote
?Bleeno? Posted February 19, 2008 Report Posted February 19, 2008 (edited) You might find that the switch runs off a separate wire for the "idiot" indicator. So you need a light to tell you you've left the door open?...... mmmmmm. :lol: Just noticed your other thread regarding broken wires ...... could be the cause of this thread. Edited February 19, 2008 by ?Bleeno? Quote
NikpV Posted February 19, 2008 Report Posted February 19, 2008 Just noticed your other thread regarding broken wires ...... could be the cause of this thread. very likely Quote
mk2vr6 Posted February 19, 2008 Report Posted February 19, 2008 since when did the wires to the door pin switches run through the doors? more likely to be the pin switch! they are a double pole switch and the interior light circuit and the idiot panel cicuits are two seperately switched circuits in the switch Quote
jamesey Posted February 19, 2008 Author Report Posted February 19, 2008 ill try swapping the switches around that will eliminate the switch Quote
?Bleeno? Posted February 20, 2008 Report Posted February 20, 2008 since when did the wires to the door pin switches run through the doors? more likely to be the pin switch! they are a double pole switch and the interior light circuit and the idiot panel cicuits are two seperately switched circuits in the switch Good point ........ I new they were separate ccts .... so 5 out of 10? Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.