Lloyd Evans

Fitted a towbar with dedicated ford (vw stamped on connectors) kit. All electrics on the car work however there are now indicators on the trailer Is it just a need to "turn on" indicators with vcds Cheers

I have a towbar to fit to my 2005 galaxy which I have removed from a 2001 sharan however I do not have the wiring kit. In an ideal world I would like to purchase a vehicle specific kit to attach to the connectors on the car. Presuming they are there as I haven't checked yet!!! I want to do this job as cheaply as possible as I don't tow that oftenand am looking for recommendations on where to get a cheap kit Alternatively I will use something like the pct wiring kit Any advice or suppliers or prices would be great Cheers

I know this is an old topic but I have "upgraded" the sharan to a galaxy!!! I have retained to tow bar from the sharan (along with all the bits to fit it) however the tow bar and twin electric where an option when the car was new, needless to say I could not remove the electrics to retain for this car So the question is what is the most economical way of fitting single electrics (7 pin plug) to a mk2 galaxy? I have looked at the pct option and it looks ok any other advice would be great Cheers Lloyd

A few quick questions How long does a belt kit and water pump take to fit?? What would you being paying at an Indy?? Cheers Lloyd

Sorted it Bonnet catch not quiet connected so drivers door wouldn't lock! Hopefully now sorted

Just changed the sharan for a galaxy so basically like for like .... But a couple of years newer and half the milage The 1st problem I have with the new car is the drivers door won't lock from remote central locking or drivers door however will lock from the inside of the car or from the boot global lock Any surgestions?? Cheers Lloyd

Away from car and just need someone to confirm the warning wires on the pads are one front one rear Cheers Lloyd

I have an abs light which has just come on, lucky my mot is now due as well !! What great timing!! As recently i lost all indicators and hazards and had to replace the fuse I'm thinking the fuse could be the first place to start?? Which fuse is for the abs?? On another note, does anyone know a good place to get an mot in Pembrokeshire west Wales Cheers Lloyd

Thanks for the help

I have a vw sharran 2001 mkii the battery ran out in the remote fob, so I took out the battery and went to town to get a replacment. replaced battery and reassembled the led on the key now flashes when the lock or unlock buttons are pressed and the car starts and drives but no remote lock unlock Do I need to reprogram the key?? If so does anyone know how to reprogrammed it ?? Cheers for the help Lloyd

Thanks for the help

Recently my mark 2 sharan tdi 115 has developed a loud wurring type noise, started with the engine running but now starts as soon as the key is turned one click. The noise sounds as if it is coming from the top of the engine under the black scuttle plate area possibly towards the drivers side. I have no idea what this could be so any ideas where to start would be great Thanks

I had the same issue, was a loose connection to the light switch (main light switch for car lights main, side, no lights) all the lights worked fine but the instruments lighting didn't change the switch job done

Simple question Is there a better grease to use when changing my drive shafts?? Cheers Lloyd

And forgot to ask how much!!