redders74

I gave this product ago today with impressive results took me a while to get the flexi exhaust off though... :D First impressions after the test drive are pretty good seems to be boosting through the rev range now and its not going into limp mode when climbing hills on the motorway which was my problem... Before applying the cleaner i could hardly move the actuator and slowly during the cleaning process it moved more freely the more you moved it. I would say though ditch the shite cardboard cover you get in the set and make a plyboard one instead the cardboard one leaked,its easy enough to do using the gasket as a template which is on the turbo/exhaust. Anyhow i`m pretty happy now just see how it goes now, as o/p stated i`ve also been through all the other proceses looking for leaks in vac pipes etc and this was the last job before i took the plunge for a turbo which isn`t cheap...Finger crossed

thanks to the original poster on this topic much easier from above only removed the indution pipe and the diesel filter cheers redders

thanks for the reply did you have the head skimmed or new head and how much did it cost you all in. thanks yeah they skimmed the head it also needed a new cam, off top of my head with all the parts required gaskets oil etc it was

have a look on your v5c should be on there

I had the same symtoms while towing my trailer tent on the motorway, temp light came on temp gauge went to full... undid the water filler cap and it was under pressure blew a load of air out(steam everywhere lol), luckily i had some water i slowly poured some in after letting it cool for about half an hour and it took about 2 litres so boiled quite a bit... cut a longer story short (mechanics humming and arring etc) it was the head gasket got it sorted but wasn`t cheap and its been fine since...

If you are using IE (Microsoft Internet Explorer), the FAQs dont work. IE is a broken browser that doesnt work with a lot of forums. Install and use a different browser, such as Firefox, Google Chrome or Opera. My recommendation is Firefox as then you can use the Adblock Plus add-on which give you a surfing experience free of intrusive advertising. Cheers for the info seatkid... i`ve installed firefox now i can read it... hopefully get my temp sensor sorted now! thanks again.

hi i`m having trouble viewing topic 56 in FAQ section any help with this would be appreciated... http://www.fordgalaxy.org.uk/ford/index.php?showtopic=11854&st=0&p=98280entry98280

not to sure if you can do what your asking about but this is cheap enough.... http://www.ebay.co.uk/itm/FORD-GALAXY-1-9TDI-MANUAL-SPEEDO-CLUSTER-/140587851178?pt=UK_CarsParts_Vehicles_CarParts_SM&hash=item20bbb05daa

thanks very much for the info.... put the code in and all working as it should again... :lol:

just to jump on this wagon, i`ve changed my ecu and my cruze as stopped working anychance of this info too thanks

I`ve done it!!! it was held in by two t20 security torx screws,1 of them was hidden under the loom behind the clusters which i couldn`t at first hence the question. craig

hi can anyone help? i need to get my pats controller out, i`ve attacked it through the cluster and from behind the fuses/relays, i just need to know whats holding it in and how to get it out to replace it? thanks craig

These insurance quotes are unbelievable? I could only dream of paying those prices, the price i have to pay is most definatly a location related issue. Must be this dead beat town i live in lol :rolleyes: And thanks to all for the replies.

hi, yeah mine sits at an angle, angling back on the nearside...

jim did you have any luck getting your sensors?

thats super that your a STAR!! mirez.. where did you get that info from i`ve been looking for hours on google etc trying to get a answer to my woes

The last codes are FINISH codes (not to be confused with Fords FINIS system) - basically details revisions and options. The last F should be a revised ecu of the A but the preceding F and B would be a worry as its more likely that the ECU is coded for a different engine, thanks both for your fast replies... the reason i`m asking is in my haste i bought the following :- http://cgi.ebay.co.uk/ws/eBayISAPI.dll?ViewItem&item=220798824137&ssPageName=STRK:MEWNX:IT in the hope i would kill a few birds with one stone. few birds being i`ve only one key (a key that won`t allow me to program it to open the doors remotely), rear door lock dosen`t work all rusted up inside and passenger door lock is different to the rest. when i say haste its only when i looked at the ecu codes mine being the FA one that i realised they were different... i was wondering would the BF ecu work on my car???

hi can anyone tell me the difference between ecu part number 038 906 019 FA and 038 906 019 BF?

hi i`m in the same situation as yourself and found these :- http://cgi.ebay.co.uk/FORD-GALAXY-MK2-REVERSE-SENSOR-TESTED-VGC-/130536692354?pt=UK_CarsParts_Vehicles_CarParts_SM&hash=item1e6497da82 cheap enough too, i spoke to the guy and hes gave me 4 for

hi all i`m trying to go through my faults on my car 1 at a time, now i`m onto my parking sensors. I`ve plugged in my vag-com lead and got the following results:- VCDS-Lite Version: Release 1.0 Control Module Part Number: 7M3 919 283 Component and/or Version: Parkingsyst. SH RDW D02 Software Coding: 00117 Work Shop Code: WSC 00020 4 Faults Found: 01545 - Sensor for Parking Aid; Rear Left (G203) 30-00 - Open or Short to Plus 01547 - Sensor for Parking Aid; Rear Mid-Right (G205) 37-00 - Faulty 01626 - Sensor for Parking-Aid; Front Right (G252) 31-00 - Open or Short to Ground 01628 - Sensor for Parking-Aid; Front Mid-Left (G254) 31-00 - Open or Short to Ground going off these readings would it be just a simple case of swapping the 4 sensors or is the loom at fault in any way? thanks craig

After days of searching the cheapest cover i could get was

hi all my insurance is due for renewal and i`m getting some real pricey quotes, i`ve done all the comparison sites etc.. i`m just wondering can anyone put me onto a cheap company that maybe deals with galaxys etc. i`m with swift cover and they want