Thanks SwFsnapper! Your post helped me sort out my ABS today. (Galaxy 2.3 1997) The past couple of weeks the right offside wheel has had a judder from the ABS kicking in, usually at lower speeds. Very unnerving. However, it wasn't constant - very intermittent. Also my ABS light wasn't lighting up on the dash-board. Haynes manual not much help, and I feared an expensive trip to the garage. Having read your article I decided to have a look-see myself. (I'm a DIY mechanic, can change discs and brakes, even the odd timing belt. ) Looking at the CV joint I could see the ABS Sensor (mine also was rusted in place) and the ring that it senses. This ring had a break in it (as was yours), thus I knew what the problem was. The ring is a soft metal, and easily snaps. Following your instructions I was able to glue (Araldite) it in place - a very very messy process, and not easy. The wire around to hold it in place is a good idea as the ring doesn't snap into place as it's bent and not very elastic. My ABS now works. A question - your repair was a year ago: is it still holding fast? Second Q - if the repair fails and the ring falls apart, will the brakes still work do you think (enough to get home). Much appreciated the article! Andy