dipsomaniac Posted September 15, 2006 Report Posted September 15, 2006 bought a cheap (dongleless) serial lead off eBay. have tried 2 pc's and reloaded v409.1 of vag-com but keep getting the same error when trying to connect to car: PORT OK: NO INTERFACE FOUND by a process of elimination i would have thought it was the lead. has anyone else had the same problem? Quote
Guest gooner52 Posted September 15, 2006 Report Posted September 15, 2006 have you tried v311.2 just in case you have the wrong version for the lead you have hope u get it sorted Quote
dipsomaniac Posted September 15, 2006 Author Report Posted September 15, 2006 just downloaded it and will try tomorrow - thanks Quote
wood73 Posted September 15, 2006 Report Posted September 15, 2006 I had the same problem I had to download and install a driver for the lead, then on vag.com test com4that worked for me Quote
RADIOTWO Posted September 15, 2006 Report Posted September 15, 2006 bought a cheap (dongleless) serial lead off eBay. have tried 2 pc's and reloaded v409.1 of vag-com but keep getting the same error when trying to connect to car: PORT OK: NO INTERFACE FOUND by a process of elimination i would have thought it was the lead. has anyone else had the same problem? I think you have answered your own post: NO INTERFACE FOUND Means no dongle ! Radiotwo Quote
dipsomaniac Posted September 15, 2006 Author Report Posted September 15, 2006 interface should work without dongle - limited access. where did you get the driver from wood73? Quote
wood73 Posted September 16, 2006 Report Posted September 16, 2006 click heretry this, its the driver, but if yours is usb vag.com will still think its a serial connection so you have to click on the com ports to test. Quote
dipsomaniac Posted September 16, 2006 Author Report Posted September 16, 2006 v311.2 works ok. 5 fault codes were logged. i was expecting to see something like misfiring on cylinders 1 & 5 as the car is misfiring on those cylinders. however. this is the 5 codes:00668 - supply voltage terminal 30 07-10 signal to low00561 - mixture adjustment control00533 - idle air control regulation00553 - mass air flow sensor g7000525 - brake oxygen sensor g39hope i have translated those corrected as the free shareware version only lists the codes for the last four codes and not description. can anyone see anything there that would explain the symptoms? Quote
dipsomaniac Posted September 16, 2006 Author Report Posted September 16, 2006 i think the next stage is to clear the codes and go for (hopefully) a good drive to see what codes (if any) come back. Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.