Guest yzfr1boy Posted July 31, 2006 Report Posted July 31, 2006 hi my 96 galaxy 2.0 aspen is strugling with the mot test its failed on the lambda reading being 1.101 i have tried a new probe on and checked for inlet and exhaust leaks and it still isnt any better have any of you guys experienced this before? any pointers would be apreciated cheers Quote
tiny Posted July 31, 2006 Report Posted July 31, 2006 Emisions related Follow this link, they had an emisions related problem on a 2.0 petrol. Quote
Guest 3.5bullet Posted July 31, 2006 Report Posted July 31, 2006 i have tried a new probe on ........................... you guys experienced this before? any pointers would be apreciated cheers you did use a pucka OE probe? as there have been reports of the patern parts probes causeing a few problems with dodgy readings! Quote
Guest yzfr1boy Posted July 31, 2006 Report Posted July 31, 2006 yer it was a bosch probe fitted the co is spot on just the lambda reading cheers folks Quote
oafcowl Posted August 1, 2006 Report Posted August 1, 2006 A mate of mine had the same problem, failed its mot on emissions, the garage ran a diagnostic and it came up with faulty lamba sensor. Replaced the sensor but the problem was still there, the garage said because the car was being driven with a faulty sensor, too much petrol had entered his catalytic convertor and this was as fault as well, had that changed plus a service and change of plugs and the car passed its mot at a cost of Quote
Guest yzfr1boy Posted August 1, 2006 Report Posted August 1, 2006 cat is working fine because the co output is zero indicating the cat is doing its job ok,i cleaned the old probe today and ran a can of forte fuel system cleaner through the inlet vacum pipes and some in the egr system to clear it out the rest in the tank ran for a bit till normal temprature and tried again and co is zero and the lambda was 1.00 perfect so im going to run it for a few days n try testing it again just to see if it settles ,a mechanic i know says it could be the air flow meter giving truble and he sugested running it with the wiring disconnected and if it goes better relace it,so i tried and it does go much better so i may get the new meter asap :angry: Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.