Guest tamcox Posted June 15, 2006 Report Posted June 15, 2006 Hello, Just wondered if the alloy wheels of a ford sierra would fit a mondeo ??? Many thanks Tam Quote
mumof4 Posted June 15, 2006 Report Posted June 15, 2006 welcome to the forum tamcox, i dont have a mondeo but i am assuming here that if they are the same size then they should try an internet site like mytires(i think its called)might be able to give you the info you need. ;) Quote
Guest tamcox Posted June 15, 2006 Report Posted June 15, 2006 welcome to the forum tamcox, i dont have a mondeo but i am assuming here that if they are the same size then they should try an internet site like mytires(i think its called)might be able to give you the info you need. ;) Hello Mumof4, Thanks for that i will check it out Quote
Guest Rich Posted June 21, 2006 Report Posted June 21, 2006 Probably teaching granny here, but...With the Sierra being RWD, it may not be as cut & dried as that. I remember once I wanted to put Mk5 Cortina Ghia alloys on my Mk1 Fiesta and was advised against it.For starters, make absolutely sure the inset/offset of the Sierra wheel is the same as the Mondeo one, otherwise your wheel bearings will last hours and it could be even worse. You need to be absolutely positive of their interchangability before you go for it, otherwise you could even end up with a dangerous car and invalid insurance. Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.