Jump to content
Ford Galaxy Owners Club

Recommended Posts

Posted

how the hell do i get the speaker covers and door cards off??

 

i have a problem with the hole left side of the car audio system.

 

i have checked the stereo with a diferent speaker and all is well.

 

so i checked the rubber tubes between the doors to see if they are perished or damaged and again they look fine.

 

all i can think of now is that one of the speaker wires is rubbing the body work or something but i cant get to them to save my life.

 

also the passenger front window switch is dicky so i am trying to check that out too... i just cant work out how to get to anything under these covers or cards...

 

HELP PLEASE!!!

Posted

removing door cards

 

 

so i checked the rubber tubes between the doors to see if they are perished or damaged and again they look fine.

 

problem is the wires in the boot break/short out etc

 

 

 

examining wires in rubber boots

 

 

also the passenger front window switch is dicky so i am trying to check that out too... i just cant work out how to get to anything under these covers or cards...

 

probably the wires broken in the insulation

Posted

i have narrowed down the speaker problem to one of the back speakers on the passenger side or as mentioned it could be in the last door rubber then... going to check that now.

 

stress stress stress!!!

Posted

i have narrowed down the speaker problem to one of the back speakers on the passenger side or as mentioned it could be in the last door rubber then... going to check that now.

 

stress stress stress!!!

 

ok heres the news, it was the larger rear passenger side speaker that had gone pop..

 

anyway it gave me a good excuse to upgrade them so i popped in a nice new set of sonys.

 

thanks..

 

ps you dont have to yank off the door cards, after you have removed all the plasticcy bits then all you do is hit the door card at the bottom and in slides up and off, no damaged clips for me!!

Posted
ps you dont have to yank off the door cards, after you have removed all the plasticcy bits then all you do is hit the door card at the bottom and in slides up and off, no damaged clips for me!!

 

somebody posted to this effect - seems that sometimes this works sometimes not :10:

  • 1 month later...
Posted

 

ps you dont have to yank off the door cards, after you have removed all the plasticcy bits then all you do is hit the door card at the bottom and in slides up and off, no damaged clips for me!!

 

how do you remove the "plasticcy" bits? by plasticcy, do you mean the black and grey bits in the picture??

post-4473-1152727797.jpg

Guest 3.5bullet
Posted
the only part in that picture you need to remove is the black cover plate behind the finger pull, stick a thin bladed screw driver in around one of the edges and prise it out, then remove the large phillip's headed screw behind that you can now see
Posted

the only part in that picture you need to remove is the black cover plate behind the finger pull, stick a thin bladed screw driver in around one of the edges and prise it out, then remove the large phillip's headed screw behind that you can now see

 

thanks alot!

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

Loading...
×
×
  • Create New...