andyw2307 Posted April 20, 2006 Report Posted April 20, 2006 Hi sorry to start a new topic as I have seen lots on power loss on this site but am still confused. My situation is my 1.9Tdi Galaxy 1998 developed intermittent power loss in february and it has happened a few times since. Symptoms are no unusual engine noises or warnings but a loss of acceleration and power, if you stop the car and switch the ignition off the fault clears and returns to normal. On advice from the previous owner I changed the MAF sensor but this made no difference. I have now discovered a mate with vag-com, the first code he found was - "0057 inlet manifold pressure intermittent". He then cleared the codes for me. After it happened again he checked and got -"00575 intake manifold pressure 17-00 control difference". Can anybody please help me with what the codes mean and what I might have to do to rectify the fault. Andy. Quote
chromedome Posted April 20, 2006 Report Posted April 20, 2006 I think these codes relate to a turbo problem. Check all the hoses for loose connections. Quote
roly1977 Posted April 20, 2006 Report Posted April 20, 2006 hello i had the same problem back last year had to have new turbo and i wouldnt advise getting a recon turbo i had 2 go wrong 1 was after 90 miles then the other within a mile :lol: i went straight to ford told them to call me when done rang me following day all done all sensors checked all pipes cleaned Quote
andyw2307 Posted April 20, 2006 Author Report Posted April 20, 2006 Which hoses and where are they located please? So I can have a look and check their condition. Thanks. Quote
dave_m Posted April 22, 2006 Report Posted April 22, 2006 does sound like an air leak of some kind, Check all the pipework air filter box onwards! Quote
Masked Marauder Posted April 22, 2006 Report Posted April 22, 2006 "00575 intake manifold pressure 17-00 control difference". Can anybody please help me with what the codes mean and what I might have to do to rectify the fault. Andy. The ECU sets the turbo to blow at a pressure, if the pressure detected by the pressure sensor is not what the ECU demands then you get this error. So your looking for leaking vacuum hoses to the turbo or a post turbo air leak. If it is not either of those then check the connector to the sensor and that the sensor is not clogged with oil. Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.