andrew welsh1958 Posted March 27, 2006 Report Posted March 27, 2006 diagnostic check shows code fault ( 00542) senor nozzle/needle G80 input open. Can anybody tell me what it is/ where its located/ how to correct it. Time is not on my side we're supposed to be going abroad in it at weekend Quote
viking Posted March 27, 2006 Report Posted March 27, 2006 On one of the Injectors you will find a wire leading to the needle lift sensor. Check the connection of the connector at this point and if necessary get a replacement sensor.... Quote
andrew welsh1958 Posted March 27, 2006 Author Report Posted March 27, 2006 but thought sensor was built in to injector? Quote
andrew welsh1958 Posted April 23, 2006 Author Report Posted April 23, 2006 (edited) :rolleyes: found problem? the third injector from the left as you look at engine, the wire from injector,after the join on the plugs one side had broken and the other side was thru to bare wire, reconect and all is now well, hope this may help someone in future,thank to all who sugested any remedies to my problems Edited April 23, 2006 by andrew welsh1958 Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.