Steve S. Posted March 27, 2006 Report Posted March 27, 2006 Hi All, Just a quickie! Do the seats have to be all installed for the MOT? I'm thinking about seat belts and checking thereof. Steve S. Quote
Justice Posted March 27, 2006 Report Posted March 27, 2006 I just had mine MOT,d last week and I did,nt have the rear 2 in and mine passed. Quote
mumof4 Posted March 27, 2006 Report Posted March 27, 2006 Mine passed with a MAF disconnected :ph34r: Quote
morticiaskeeper Posted March 27, 2006 Report Posted March 27, 2006 I rarely have all the seats in, but lest test I noticed that the printed check sheets the new system spits out shows the location of all the seats to be checked. Not a problem unless you're tested by a jobsworth Quote
Steve S. Posted March 27, 2006 Author Report Posted March 27, 2006 Dear All, Thanks for your responses.I've decided to play safe and put the seats in , beit only temporarily.So, fingers crossed for tomorrow. It should be ok as long as the headlight fuse doesn't start playing up! Cheers Steve S. Quote
Masked Marauder Posted March 28, 2006 Report Posted March 28, 2006 I don't care what the computer says, the MOT rules say seats/seatbelts are only tested if they are fitted. There is no requirement to have them there, you only need a driver's seat by law. Quote
Steve S. Posted March 29, 2006 Author Report Posted March 29, 2006 Well...good news, it passed!Only two "advisories",....exhaust rather rusty, and couldn't see brake pads.So, another problem free year of happy motoring! Such joy! Regards Steve S. Quote
Topbloke Posted March 29, 2006 Report Posted March 29, 2006 i dont know if that is tounge in cheek but the test is only letting you know at the time of the test that it passed a minimum standard and says as much on the certificate Quote
Masked Marauder Posted March 29, 2006 Report Posted March 29, 2006 Well...good news, it passed!Only two "advisories",....exhaust rather rusty, and couldn't see brake pads.So, another problem free year of happy motoring! Such joy! Regards Steve S. He does not have to see the brake pads, if he can't then the only test he can do on the brakes is an efficiency test. If he could see them and they were contaminated/insecure/less than 1.5mm of friction material then that is a fail. But an MOT tester is not allowed to strip anything down to test it. Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.