Jump to content
Ford Galaxy Owners Club

Recommended Posts

Guest ratherhaveanewone
Posted

Well its -5 outside and the rear drivers side brake is frozen solid (again) !

 

In the old days water in the brake fulid was the usual suspect

 

So

 

a) Anything I can do to un-freeze them

 

:angry: Why is it happening

 

John

Posted

A more likely culprit is the handbrake mechanism which acts on the rear brake pads. Gentle application of heat from a hairdryer on the actuator lever then manipulation of the lever with molegrips should shift it. You can do this without jacking up, by crawling under the rear bumper.

 

I had a problem with the handbrake seizing last summer, and I found that both handbrake actuators were caked with dried mud. Maybe you're suffering from frozen mud ? I now make a point of directing the jet wash lance at the back of the brakes when washing the car and haven't the problem since, although I tend to leave in gear if it's on the drive rather than on the handbrake.

Posted
Ive also had this problem ( not frozen but sticking ) And as above said, its the handbrake sticking at the rear wheel end, And i also crawled under the back and you can push the lever up to release the brake. I also now leave the car in gear when parked and dont pull the handbrake all the way up .
Posted

You can effect a permanent cure for very little work.

 

Crawl under the back, break all the mud off with a screw driver followed by a wash with a stiff brush. Direct some spay oil (

Posted
would silicone spray not be even better?seems to take ages to wear off

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

Loading...
×
×
  • Create New...