cos 4x4 Posted January 9, 2006 Report Posted January 9, 2006 i,m going to be fitting a set of 6x9s in the back panel shortly and powering them with a small sony ampwhat i need to know is where under the dash can i get a wire through to the battery and how much shit have i got to remove to fit it allany help much appreciated :P Quote
Guest vr6galaxy Posted January 9, 2006 Report Posted January 9, 2006 It all depends on what you class as SHIT? :P you could always try hitting the search http://www.seatcupra.net/images/smilies/usethesearch.gifengine and see what that brings up? :P boo Quote
cos 4x4 Posted January 10, 2006 Author Report Posted January 10, 2006 It all depends on what you class as SHIT? :P you could always try hitting the search http://www.seatcupra.net/images/smilies/usethesearch.gifengine and see what that brings up? :P ie under dash plastics seats stuff under bonnet and so on Quote
steve67car Posted January 10, 2006 Report Posted January 10, 2006 huge group of grommets on the near side bulk head so take your pick :P Quote
katman Posted January 10, 2006 Report Posted January 10, 2006 I'm following this thread because I am about to fit an amp and PC in the rear of my Galaxy. Hopefully I will find it a lot easier than the wife's Lantra which I have been working on today. Had to remove the inner wheel arch cover as the main wiring harness goes through the inner wing and appear near the battery. The only other possible route when through the engine bulkhead in the centre and is right behind the dash :huh: I now have a power cable at the battery and the audio leads at the head unit. The amplifier end of the leads are currently laying at the side of the rear seat as it got too dark to see how to get them through into the boot. Cant wait to get the Galaxy done though <_< Keith Quote
cos 4x4 Posted January 10, 2006 Author Report Posted January 10, 2006 have fitted infinity 5 1/4 componenets in the front door behind the grills infinity 6 1/2 coaxails in the back doors but had to mount them on the outside and am going to fit infinity 6x9 in the back panel on a set of mdf spacer rings and power them with a small sony 2 channel amp all powered off a kenwood mp3 head unit and may also fit a 8" sony active sub in the boot area as well all this just to keep the kids happy <_< Quote
danyoda1 Posted January 11, 2006 Report Posted January 11, 2006 wow - some fellow bass heads on here - can't wait to finish mine so i can post some pics!!!! :unsure: Quote
cos 4x4 Posted January 19, 2006 Author Report Posted January 19, 2006 right jst to let you all know 6x9 speakers won,t fit in the back of a mk1 galaxy sharan and bama you,ll need to make a 20mm spacer ring for them to fit have just cut the holes ready now and fitted 10m spacers the and they don,t go bugger so tomorrow will be makik more rings to mount them on cause they goto go now cause i don,t want big holes have got to be honest it,s a fiddly old car to strip down but should be worth it in the end so everybody take this advice befors trying to fit them Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.