mark1rev Posted December 11, 2005 Report Posted December 11, 2005 hello on my 2.3 gal the windscreen washer water is not working properly its like the water in the pipes is returning to bottle ? when i try to wash the screen the motor is noisy then the water comes out and it goes quiet.it the washer pump built in the bottle or seperate or does it have a non return vale so the water dont empty out of the pipe ? Quote
Guest vr6galaxy Posted December 11, 2005 Report Posted December 11, 2005 The pump is a seperate item it clips into the bottle, IIRC there is a screen filter on the hole the pump fits into, these can block with crap and mould that builds up in the bottom of the bottle! stick the hose pipe in as far into the bottle as it will go and try flushing out the crap! you may have to remove the pump and clean the filter by either cutting it out! or back flushing it and yes there is a non return valve in the system Quote
mark1rev Posted December 11, 2005 Author Report Posted December 11, 2005 do i have to remove bumper as it says in haynes manual Quote
Guest vr6galaxy Posted December 11, 2005 Report Posted December 11, 2005 Not if your trying the hose trick first! but I will take a look at mine later and get back to you on that :angry: Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.