Guest treppid Posted November 26, 2005 Report Posted November 26, 2005 Hi folks, just for info regarding brake light switches. In my case for a 1995 Sharan 1.9 TDi. Initial enquiries with dealer suggested only two possibilities, two terminal or four terminal, mine was a two terminal. This is not so, there are two types of two terminal switch. Mine had a blue body, the wrong one was black. The plunger on mine was about 3/4 of the length of the wrong one. The terminals on mine were much smaller and closer together than the wrong one which had normal looking Lucas type tags. Finally,after much discussion, the correct switch was located in the dealers parts list not under 'brake switch' but somewhere in amongst engine Lambda sensors etc. Pain tho' it is I would advise taking the switch out and getting the ref number before venturing into dealer land! :D Quote
Karapaul Posted November 26, 2005 Report Posted November 26, 2005 Thanks treppid Considering getting one of these on Monday so your advice was very timely CheersPaul Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.