1310 Posted November 16, 2005 Report Posted November 16, 2005 dear friends,ive been told that i need to replace my brake lite switch which i asume is at the top of the brake pedalcan anone give me some help...is it a hard job...get a novice like myself do it...any advice or instructions would be much gratful regards Quote
bigdaddy Posted November 16, 2005 Report Posted November 16, 2005 Dead easy,,remove facia under the steering wheel then replace the switch,,,,,it twists like a light bulb,,,,,,,be carefull the wire lead is very short,,,,,,,also check the switch before you go to GSF,,,,they have a 2 pin and 3 pin switch,,,,,,,so check before you go,,,,,,,,I paid about Quote
soptom Posted November 16, 2005 Report Posted November 16, 2005 It's very easy, do as written above and you'll be fine, if you have two switches on your brake pedal, it's the top one you want. Remember to pull the plunger all the way out on the new one before fitting, it's on a ratchet and will find it's own position when fitted.Watch your hands too, there are sharp edges down there, I speak from experience. :angry: Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.