graemer Posted October 5, 2005 Report Posted October 5, 2005 I have struggled and finally managed to remove the lower dashboard trim - it is a real b****** to separate the lower RH panel from its adjacent brother. Can now get at the switch - turned it to release and it is loose but cannot get it off the bracket - one post mentioned there possibly being a securing nut. Is this the case? Thanks. Quote
Guest thecodfly Posted October 6, 2005 Report Posted October 6, 2005 hi there i did not find a securing nut when i did mine, it just sort of twists of, it is a bugger to put the new one back on, you might not want to fit with kids around, lol good luck Quote
graemer Posted October 6, 2005 Author Report Posted October 6, 2005 Thanks that is good advice! I think a few passers by were shocked when I was trying to get the switch off last night! Quote
graemer Posted October 6, 2005 Author Report Posted October 6, 2005 Finally got it off - once I had turned it a quarter turn to release it I then used a screw driver to help it off - the lugs which hold it secure are a tight fit through the bracket to remove it. Required a little help! Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.