Water Washing Sensor

[joczeze]

Hi all.

I had to change the instrument cluster of my 1.9 Galaxy, 1998.

i decide to put one with board computer, but now I have the light of te washer bottle always on. I decide to correct this, and brought the sensor. After this I find that I d nor have the place to connect it. Des anybody can help me and tell me how to connect it ?

 

Thanks

[Guest vr6galaxy]

The sensor should mount into the washer bottle, look under the car from the front, look up at the washer bottle, it mounts in the front of the bottle about 1.5/2'' up from the bottom

should be a two pin plug?

brown/blue from the dash via cjb via dash yellow/black off back of clocks

brown/white to ground

[joczeze]

The problem is not the hole in the bottle. The problem is that I expec to have there a cable to connect the sensor, but I cannot find it.

 

Thaks

[Guest vr6galaxy]

If the cabling is in place then the plug your looking for is tucked up out the way in the inner wing, tied back in the loom, or even pluged into a blanking plug clipped onto the body somewhere in the region of the washer bottle?

[joczeze]

Hi, vr6galaxy

 

Thanks for all information.

I have there plug (357972762) with 2 cables, one red and other brown.

I was thinking that was this, but the plug are diferent from the sensor (7M0 919376) and i believe that I need a plug like the 7M0 973202.

 

Are the first (357972762) been replaced by the Last one 7M0 973202.

 

Thanks

[joczeze]

Still cannot put that working. Does the sensor need to be actvated with VAG-COM ?

If yes does anybody tell me how ?

 

Thanks

[Guest vr6galaxy]

how many plugs are there on the back of the new clocks and how many do you have to plug in?

[joczeze]

Hi, vr6galaxy

 

how many plugs are there on the back of the new clocks and how many do you have to plug in?

 

Well in back of the clocks I have 2 plugs, one red and one black and both are conneted.

Do you mean tha I should have another connector to plug the sensor ???? (Sorry for my english).

 

Thans

[Guest vr6galaxy]

No you have the correct amount of plugs :unsure: have you plugged in the sensor and mounted it in the washer bottle?

[joczeze]

yes I did. I have a sensor wand cableas are one red and other brown. I will send you a photo of that taken today during instalation.

 

Thanks

[Guest vr6galaxy]

no photo attached to email :unsure: is the sensor a shorting switch relying on the washer fluid to complete the circuit or a pressure switch relying on the wieght of the fluid to operate it?

have you checked the sensor by trying it in water or by pushing on the sensors surface that is in the washer bottle?

[Guest vr6galaxy]

not sure about the plug shape or the cables colours on the photo? do you have head light washers jets? that could be the plug for the pump for those? from my wiring diagrams pre 98 should be plug C203 brown/white and brown/blue

post 98 again C203 yellow/black and brown

any chance of a picture of the sensor?

[joczeze]

not sure about the plug shape or the cables colours on the photo? do you have head light washers jets? that could be the plug for the pump for those? from my wiring diagrams pre 98 should be plug C203 brown/white and brown/blue

post 98 again C203 yellow/black and brown

any chance of a picture of the sensor?

 

No I do not have head liht washers, I also had think abot that. The sensor they sell me are diferet from the ogiginal plug ( on photo) I had buy a new plug, and connect it. Nothing change. The colours are rd and brown. Can you see if this is to the head light washers jets and wat colour they should be ?

 

Thanks

[joczeze]

Hi all

 

Still not sole this problem. Does anyone can help me, may be with some photos of the cables and where I can find it.

I believe I do not have the cables. I will have to put it. Does anyone know how can I do it ?

 

Thanks

[joczeze]

Can anyone send me some electric scheme ?

 

Thanks