Abs Not Working

[P2k]

:o My ABS light is on all the time. (ABS does not work), I have had a guy come and plug a test thing in. which came up with 35 errors on the abs. then there was something about a blink test, where he said the abs light should flash so many times to show the problem. This never happened. He said it could be a power feed or earth problem. Is this right?? (Fuse

[Guest marcusheawood]

It's prolly one of the sensors, they're known for going wrong. Or the induction ring on the CV joint.

[Topbloke]

p2k try a search as this has been covered soooooooooooooooooo many times , the guy that came round is an ass unless he's family then he is a nice bloke but is talking out of his ass

[P2k]

tested all the wheel sensors.. and the rings... all are fine......I don't know what to look at next... :blink:

[Topbloke]

p2k when do's the light come on , straigh away or only after the car starts moving

[P2k]

As soon as the key is turned it

[Topbloke]

if the light comes on and stays on even without moving then it will not be a sensor problem, therefor you need to access the ecu vie vag com or equivelent

[P2k]

Had done once, with no joy...he said it was a feed or an earth

[seatkid]

How did you check your sensors? It certainly sounds like open or (less likely) short circuit sensor or a wiring/connector problem. Also check the wirng to the ABS solenoid block and the solenoid(s) themselves.

[P2k]

I tested the sensors resistance with a multimeter, all read 1.something