Jump to content
Ford Galaxy Owners Club

Recommended Posts

Posted

I have always run the tyres between 40-42 PSI depending on how fat my passengers were.

 

While having a new tyre fitted recently I asked the chap to put in 40 PSI. He said that I shouldn't be putting in more than 36 PSI maximum.

 

Can anyone advise.

Posted

My manual (2002 Tdi Zetec) clearly states for the 215/55 R16 (reinforced) : 41f 38r and for fully loaded 44f 49r

 

Interestingly, for the same size tyres, but not reinforced the pressures are higher at 45f 41r and 48f 55r respectively..

 

http://img295.echo.cx/img295/2081/kd0094vf.jpg

 

 

 

Mike

Posted

FWIW, I run my rears @ 38 and fronts @38 also, keeps the handling sharp, and less bumpy than having the fronts @ rec pressure... Done just over 8k on brand new front and rear tyres, and all wearing nice and evenly..

 

Mike

Posted
Pressures for mine are on a label on the inside of the filler cap - 33front 30 rear for normal loads.
Posted

Just had a look behind my petrol flap (spend a lot of time with it open but have never read the chart). The pressures quoted 33/30 are for 215/60 R15. Mine are 215/55 R16.

 

Thought I would check the owners guide. 215/60 R15 (they don't quote for 215/55 R16) it says 34/31 - different to what is on the petrol flap for up to half load???

 

Had to laugh as the owners guide also advises on tyre pressure for continued driving at high speeds - it says 'for every 6mph over 118 mph add 3 PSi.

 

Can anyone please confirm whether the pressures should be higher for 215/55 R16 than 215/60 R15.

 

Thanks

Posted
Just got back from the garage. I put 41 PSI in the fronts and 38 in the rears. I figured that the 2.8 lump needed at least 40 PSI and I didn't want to be running the backs much lower. Don't know whether it is because the sun is shining but it does seem to handle a bit better.
Guest MATT
Posted

Normally, i have 38psi in the rear, and 41 psi in the front, i think mine are 215/55 R16 - but would have to check.

 

at the moment i have got, 46psi in the front, and 44psi in the rear (caravan towing)

 

MATT

Posted

Tyre pressures for these size tyres does seem a bit strange.

My book has it written on the back by the dealer as 34f and 31r unloaded.

But the higher pressures do make sense.

It's ahrd to know what to inflate them to really but I might inflate to the higher pressures as looking at mine they seem maybe a little bit flat.

Guest stawarz
Posted

Checked the manual and the silver sticker I have near the door striker, have 41 front and 38 rear for normal load for mine....

 

Given the weight of car and tyre profile I'd be surprised if a pressure as low as 33psi should be used!

Posted
I find this huge range of pressures quoted by Ford most odd, although the high pressures are consistant with the sort of pressures medium size vans require. Finding an airline capable of delivering that sort of pressure can be a problem, the ones at supermarkets which appear to have an internal compressor in their cabinet take several minutes to show 50 PSI, and then you find your own gauge only shows 38. Best are the ones that work off a garages compressed air system and only take a few seconds to deliver a genuine 50PSI.
Guest MATT
Posted

Ive got a air compressor from motor world, and the gauge on it is not very precise, so i use a digital pressure tester - very good it is too.

 

MATT

Posted

When i first got my Gal, the garage put two new front tyres on and they were at 32psi

I didn't change these, and they basically were worn out at 10k miles

 

I now run 38psi all round, and find this the right pressure for ride comfort, handling etc

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

Loading...
×
×
  • Create New...