Panel In Between Front And Back Door

[bowman]

hi all

back speaker was not working on right hand side to took a look ,

removed round plastic conector in centre panel wire was broken fixed

wire round part in panel has fallen in how do i remove the panel in between front and back door where the front seat belt is conected

thanks bow

[Guest vr6galaxy]

Undo the bolt holding the lower seat belt mount in place, peel back the door rubbers, lift the trim panel away at the bottom of the B post, it's also held in place by a couple of clips just under the slot the seat belt passes through, so be gentle and try not to break them! with it unclipped lift it out the way, either just prop it up out of your way or remove it completely by slipping the seat belt out of the slot in the panel

when your done just remember to do the seat belt bolt up to 40Nm or just FT :huh:

[wonkydog]

My lower panel also has a screw fixing it to the top panel. It's obscured by the seat belt strap as it comes out of the top of the lower panel. The bottom of the lower panel is slid under the plastic strips along the edge of the carpet.

[bowman]

thanks

will look at it 2 morrow