Guest wxp Posted May 13, 2005 Report Posted May 13, 2005 The problem with my front wiper is that they will not stop, they do change speed Quote
johnb80 Posted May 13, 2005 Report Posted May 13, 2005 Explain a little more.... what motion sensor? whats the problem? Quote
seatkid Posted May 13, 2005 Report Posted May 13, 2005 No...., its an electronic control module (a two speed regulator). Unless you are an expert in hybrid thick film microelectronics repair and armed with an unobtainable circuit diagram it is not repairable. However , a good clean and checking the connectors can sometimes do the trick. Before you conclude that the module/motor is kaput, check your wiper linkage as the most common fault is this seizes (and blows the fuse). Do a search on wiper linkage for more info. Quote
faded-fish Posted May 13, 2005 Report Posted May 13, 2005 No...., its an electronic control module (a two speed regulator). Unless you are an expert in hybrid thick film microelectronics repair and armed with an unobtainable circuit diagram it is not repairable. However , a good clean and checking the connectors can sometimes do the trick.SeatKid - My wipers only work on the slower speed - could this be the problem? If so, where can I find this Electronic Control Module? Quote
seatkid Posted May 13, 2005 Report Posted May 13, 2005 I think its physically attached to the motor. Some more information here Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.