marinabrid Posted May 8, 2005 Report Posted May 8, 2005 hi allmk1 98 year got no remote locking when locking the doors whats the small red warning lite on the drivers door supposed to do to tell me the alarmisworking.thanks Quote
Guest vr6galaxy Posted May 8, 2005 Report Posted May 8, 2005 The LED on the door is to tell you that the PAT'S system is in operation, the PAT'S system has priority control of the LED over the OE alarm system if one is fitted? the flash rate signifies the status of the system and is used to show possible faults depending on the flash rate! Quote
Guest Davtona Posted May 8, 2005 Report Posted May 8, 2005 If the remote locking is dead is the little flashing led (2/3 per sec) working on the key? if not, it's possible the batts in the key are flat. Yes the led in the door is to say the alarm/immobiliser is active, also it shows if a fault is present after ignition is turned on and the system has done it self-test (allegedly). Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.