Jump to content
Ford Galaxy Owners Club

Recommended Posts

Guest GT-Four
Posted

dave-g will pm you my postal so you can send jiffy bag

 

is it just the sensor minus the duct you need...if so i will need to find some anti tamper torx bits ;-)

 

also re the picture of the maf above does it need a gasket/sealing ring etc at that connection??

 

regards john

Posted
also re the picture of the maf above does it need a gasket/sealing ring etc at that connection??

Yes. A large O ring.

 

Did u check its not jammed in the airbox end?

Guest marcusheawood
Posted
Hey GT-Four does that motor go like it looks? Is Carlos Sainz missing one from his collection?
Guest JohnP
Posted

Just a thought - I had the same problem - traced it to a bodged connecter on the MAF sensor - if this is also your problem then new sensors won't change anything.

The connector on mine was suspiciously held in place by a cable tie - when properly mated, they stay put without external assistance...

 

Incidentally, a collegue of mine tells me that unplugging (or otherwise disabling) the MAF sensor is a cute trick to improve the emissions temporarily - occasionally seen at MOT tests.

Guest GT-Four
Posted

hi john

 

A new maf indeed cured the fault on my sisters galaxy.

 

if the maf plug is loose or easy to pull off i can only assume the retaining clip is broken :-(

 

As with a good clip it should be nigh on impossible to remove without unclipping

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

Loading...
×
×
  • Create New...