SharanTDICarat Posted March 29, 2005 Report Posted March 29, 2005 Noticed tonight the rear drivers side hand brake seems to be sticking a bit checked the cable it seems to be moving freely and with the wheel jacked up I can turn the wheel its just stiff. Anyone any ideas , is this a common fault?Tam Quote
Guest vr6galaxy Posted March 29, 2005 Report Posted March 29, 2005 Could be as simple as a dodgy seal on the piston not allowing it to retract fully or a full blown auto adjuster mech failure! or it could be a dieing wheel bearing! strip the calliper down and see if the wheel spins any freer with the pads removed? and do you still need steps to get in? :o I have gone back to 16''s and the ride is a lot more complacent and comfy but due to the suspension set up I can still let rip! :D Quote
SharanTDICarat Posted March 29, 2005 Author Report Posted March 29, 2005 and do you still need steps to get in? :D I have gone back to 16''s and the ride is a lot more complacent and comfy but due to the suspension set up I can still let rip! :D Yeah, still not got around to installing the Eibach springs yet :o Although I have chaged the side repeaters to clear LED ones and the windows are tinted now. 2 out of 3 ain't bad. Just need to get a loan of a set of spring compressers and a free weekend to get her lower :D :D Quote
Guest vr6galaxy Posted March 29, 2005 Report Posted March 29, 2005 Well post a picture then and show what it looks like? :o spring compressors? cable ties and a bit of old rope will be just good! think about it do you really need all those fingers and thumbs? Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.