JONESERIC Posted March 1, 2005 Report Posted March 1, 2005 Hi Everyone Recently I had the dreaded submerged central locking control module, the front scuttle drains were blocked and water had made its way via the front nearside footwell into the sump! under the passenger seat. The module was a write off, my vagcom just fell about laughing when I interrogated the module. Replacement duly arrived and fitted, all locking functionality back apart from the remote key!! Sharan handbook describes how to re synk the key, however when the key is inserted in the drivers door and moved to the unlock position 3 times, the door mounted LED does not flash to indicate that you are in program mode. VAGCOM address 35 displays no fault found; however after pressing ahead with the routine without door LED flashing the key fob still gives 5 flashes indicating successful transmission. I have carried out the checks detailed in TIS and ERWIN, but no avail Has anyone had a similar problem? Eric Quote
JONESERIC Posted March 6, 2005 Author Report Posted March 6, 2005 I have done a bit more work, After the full functional check from ERWIN, I have 4 faults, intermittant on the Drivers Door, Passenger Door and Tail gate CL swithes, however all check out with a multimeter, Looking at the circut diagram all these switced input into the control box on the same row of pins. Really confusing because the CL works fine in all modes with the key. Only the remote fails. Eric Quote
Masked Marauder Posted March 7, 2005 Report Posted March 7, 2005 Are you startig off with the alarm off and the door unlocked. You must hold the key in the unlock position for at least 1/2 a second each time too. Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.