Door Edge Trims

[gazza007]

I've just had a new NS door skin etc fitted following a scrape. I noted after leaving the repairers that the rubber that fits on the inside of the door at the bottom is missing & the plastic strip that it connects to that runs up vertically at the front edge is also missing. I noted on OS front door that the vertical strip is secured with poppers that clip on to metal lugs that are part of the edge of the door skin.

My concern is that on the new door skin there are only 3 at the top & 1 at the bottom, not all the way down as it should be. I contacted the repairers who said that he forgot to mention that they were awaiting parts as one didn't fit.

All the part were genuine SEAT. Has there been a design change on the door skin fold?.

I've had a look at our works 6 month old Gal & the poppers go all the way down the edge. Has anybody got a newbie & wouldn't mind checking.

Or have the repairers boobed somewhere?

To be honest they have done a good job on the paint, re-sprayed the full side & repaired a bad scratch on rear panel as a favour as my insurers wouldn't approve because their engineer was akward.

 

Cheers ;)