Jump to content
Ford Galaxy Owners Club

Recommended Posts

Posted

1. read the manual

2. read this forum.

3. It's accessed through a slider in the wheel arch lining and you need small hands to reach inside to get to it.

Guest blatters
Posted

The headlight bulb is accessed from the engine bay. Only the sidelight and indicator bulbs are accessed from the wheelarch sliding cover thing!

 

The other threads on this site are really helpful with some actual diagrams. So go and have a look.

 

But............. watch out for this!

 

There are some wire spring clips that you have to undo to release the bulb from the holder. The trouble is that you can't see it with your eyes. So be careful to have a good feel and don't be impatient. Use your logic brain not anger and force :rolleyes: And don't try it within an hour of dusk!!!!

 

All the best, no car I've had ever before has been this fiddly for the headlamp bulbs. But there's no way I'm admitting defeat and getting a dealer to do that for me. Otherwise, next stop is asking the dealer how to check the oil!!!

 

Blatters :lol:

Posted

It's dead easy if you remove the headlight unit, 10 minute job.

 

There are two screws on top of the headlight with plastic caps on, remove these.

 

At the bottom of each side of the headlight is a screw, slacken these off a couple of turns, don't remove them.

 

The headlight then pulls forward giving you pleanty of room to change the bulb.

 

You will need a long star drive screwdriver.

 

Hope this helps.

Posted

Just changed near side H/L bulb. Yes, I, started when it was going dark. Yes, I didn't read the TIS or manual. The job is an absolute pig. Take heed of the above advice.

 

Rich

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

Loading...
×
×
  • Create New...