Guest cotch Posted September 15, 2004 Report Posted September 15, 2004 I have cruse control on my 2.3 ghia X, and it won't work all the time. If it works it will work for entire journey and works well. If it will not work it won't engage at all any ideas ? Quote
Guest exemplum Posted September 15, 2004 Report Posted September 15, 2004 Few things you can check, Firstly, make sure the control switches (on the indicator stalk) are effective, could be that the on /off function might have an intermittent operation. Secondly, check the brake (and clutch if fitted) switches, might be that the cruise is switching on, but then going straight off again due to the sensitivity of the cut out switches. These can be adjusted. Thirdly, check the condition of the vacuum hoses, I had very similar problems with my 2.3 Ghia X and found a split vacuum hose. Remove the Nearside front indicator and locate the vacuum pump inside the nearside wing cavity, this is where I found my split hose. Hope this helps! Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.